MODEL XQ114/6BHYDRAULIC POWER TONG
Model XQ114/6B(4 1/2″) hydraulic power tong is an open type power tong for the making up and breaking out of tubing in well services. This product has the following features:
The tong is made up of master tong and backup tong, the master tong has a high and low gear train, the tong is compact, light and efficient.
Two shifts provides high speed at the high gear and large torque at the low gear.
The brake mechanism is on the upper and so it is easy to adjust and repair.
The new type hydraulic Backup tong and master tong form a combined tong .Operating the manual control valve of master tong, the combined tong clipping and unloosing simultaneously.
The adequate torque will be gained during making up and breaking out the various steel tube by adjusting pressure of oil .
This product has owned several patent of China.
| 01.02-02M Idler Z=24 |
| Guide wheel 26.230.00 |
| Tubing power pliers accessories XQ89/3YC main pliers cycloid hydraulic motor BMD-400 |
| KHT5500-267 TQ245.15(2)-2 Pin shaft |
| KHT7625-926 GB/1235 O-Ring 24×2.4 |
| KHT7625-882 KHT8625.3-1 Tension Spring |
| KHT5500-416 KHT5500.2 (2) .1.3-2 Spring(① 1.6x ① 9×51.5) |
| KHT7625-861 KHT9625.2.6-5 Angle coupling |
| KHT5500-235 Bolt 1/2″UNC |
| 01.01.00M Tong head |
| Pipe oil power pliers accessories XQ89/3YC main pliers slope plate XYQ3C.Z.1-4 |
| KHT7625-433 Hex bolt 7/16″UNFxi 1/4″ |
| KHT7625-593 YG-46 Ball connector |
| YX sealing ring D45 for fitting hole of pipe oil power pliers |
| KHT5500-36 KHT9625.1.1.1-2(5) Die5 (11/16″) |
| KHT7625-618 KHT5500.1.15D-2 Adaptor NPTl/2-M24x 1.5 |
| GB/T93-87 Washer 20 |
| Bearing 6006 GB/Т276-94 |
| KHT7625-923 TQ340/35YA.1.16.1 Cylinder end joint 1 |
| KHT5500-152 GB/T308 Steel ball (p6 |
| KHT7625-76 KHT8625.1.1-2 Open gear |
| KHT7625-800 KHT8625.2.2-1(4) Front Jaw set4(7 5/8″) |
| GB/T70.1-2000 Screw M8X20 |
| KHT7625-718 Hexagon bolt l/4″-20UNCxl 1/2″ |
| KHT5500-380 KHT5500.1.1-11 Spring pocket |
| GB861.1-1986 Lock washer 6 |
| KHT7625-91 KHT9625.1.1.1-2(2) Die 2(1/2) |
| KHT5500-241 KJD9625.1 3.1 End cover |
| KHT5500-222 Hexagon socket cap head screws l/4″-20UNCxl/2″ |
| KHT5500-505 Hexagon Socket Head Screw5/16,rx2 “ |
| KHT5500-218 YG-61 Right-angle connector NPT1/2 |
| Pipe oil power pliers accessories Hexagonal weld M8*30 |
| KHT5500-64 Spring washer 3/8″ |
| KHT5500-40 KHT9625.1.1.1-2(9) Die9 (15/16″) |
| KHT7625-851 GB/T1070&1 Y0-Ring 180x150x18 |
| Pipe oil power caliper accessories brake screw M10*35 |
| KHT7625-362 TQ508/70Y.2.1-3 Bush |
| KHT7625-334 Hand control valve assembly(O) |
| 71 823-S BV-100C Casing Head Tong |
| Pipe oil power caliper accessories brake spring XYQ6B.Z-6 |
| Pipe oil power pliers accessories extension joint XYQ12.B.12 |
| KHT5500-26 (4) KHT5500.1.1.1 (4) Front jaw plate assembly (3 1/2) |
| KHT5500-233 Manual reversing valve (Y) |
| KHT5500-452 KHT9625.2 (2) .3-2 Rod adaptor |
| 01.01-11M “100 roller (5″, 41/2″, 4”) |
| KHT7625-156 KHT13625.1.3 -4 Small idler gear |
| KHT5500-374 GB/T10708.1 Y-ring Y40x50x6.3 |
| Pipe oil power tong accessories intermediate wheel assembly XYQ6B.Z-53 |
| KHT5500-460 GB/T3452.1 O-Ring41.2×3.55 |
| 01.01-07M Dial disc |