| Control cable ZR YCKEPH-450/750V 22×1.5+14x2x1.5, 71m. 3.03.01.03.032 |
| Central processor 6AG1 315-2AH14-7ABO |
| Discrete input module SIPLUS SM 321 Siemens 6AG1 321-11BL00-2AA0 |
| Output module SIPLUS SM 322 Siemens 6AG1 322-11BL00-2AA0 |
| Output module SIPLUS SM 332 Siemens 6AG1 332-5HD01-7AB0 |
| Analog input module SIPLUS SM 331 6AG1 331-7KF02-2AB0 |
| Interface module SIPLUS SM 153 Siemens 6AG1 153-1AA03-2XB0 |
| ACS880-04-650A-7 module 3AUA0000187098-M |
| Profibus communication module FPBA-01 3AFE68469325 |
| Memory module ZMU-02 3AXD50000006010 |
| HTL pulse encoder module FEN-31 3AFE68978955 |
| Control panel ACS-AP-W 3AXD50000025964 |
| JIANGSU RUTONG PETRO INSERT BOWL 6608 |
| IMPELLER FOR CENTRIFUGAL PUMP, SIZE : 8× 6× 12 |
| CASING WEAR PLATE , 4 × 3 × 13 INCH-P/N:G0006074, BRAND : |
| CASING WEAR PLATE , 6 × 5 × 14 INCH-P/N:G0006050, BRAND : |
| IMPELLER FOR CENTRIFUGAL PUMP, SIZE : 4 × 3 × 8.5 , P/N: G0006185 |
| IMPELLER FOR CENTRIFUGAL PUMP, SIZE : 4 × 3 × 10 , P/N: G0006188 |
| IMPELLER (11 INCH), 6 × 5 × 11 INCH – P/N: G20006168 |
| OUTBOARD LABYRINTH SEAL FOR CENTRIFUGAL PUMPS –P/N:G0006158 |
| INBOARD LABYRINTH SEAL FOR CENTRIFUGAL PUMPS –P/N:G0006159 |
| IMPELLER(10.50 INCH), 8 × 6× 10.50 INCH-P/N:G0006217 |
| IMPELLER(13 INCH),8 × 6 × 13 INCH |
| IMPELLER(11.50 IONCH), 8 × 6 × 11.5 INCH-P/N:G0006219 |
| PARTS FOR “BOMCO” DRAWWORKS, TYPE JC-70D SANDREEL DRUM ASSY., DRWG. NO. AF50001-01.02.00A SWIVEL JOINT XL-L15 |
| ENGINEOIL LUBRICATING SYSTEM, DRWG. AF50001-06.00 OIL FILTER, SUCTION NJU-250X180F |
| TORQUE FORCE ROD, JC030704 |
| SPRING PLATE , JC030703 |
| BRAKE BLOCK, CPTDC P/N: JC030806 |
| TORQUE FORCE ROD , JC030804 |
| RING, DUSTPROOF, UNREINFORCED, d70(Q/ZB336-77), SAFETY CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: BG80-2 |
| RING, SUPPORT, CKS0700, SAFETY CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: BG80-9 |
| SPRING, DISK, SAFETY CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: BG80-14 |
| RING, DUSTPROOF, UNREINFORCED, d70(Q/ZB336-77), SERVICE CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: KG80-2 |
| SPRING, SERVICE CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: KG80-9 |
| RING, GUIDE, 10X2.5X430, SERVICE CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: KG80-15 |
| RING, SUPPORT, CKW1500, SERVICE CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: KG80-16 |
| NUT, HEX, M24, FOR DEADLINE STABILIZER, MODEL: JZG41, MAKE: HH, P/N: GB /T 6170-2000 |
| WASHER, SPRING, 24, FOR DEADLINE STABILIZER, MODEL: JZG41, MAKE: HH, P/N: GB /T 93-1987 |
| RING, GUIDE, SIZE: 10 X 2.5 X 226.5, FOR DRAWWORKS, MODEL: JC40DB, MAKE: SICHUAN HONGHUA, P/N: KD22-90 10X2.5X226.5 |
| O-RING, SIZE: 160 X 5.3, FOR DRAWWORKS, MODEL: JC40DB, MAKE: SICHUAN HONGHUA, P/N: GB3452.1 160X5.3 |
| O-RING, SIZE: 140 X 5.3, FOR DRAWWORKS, MODEL: JC40DB, MAKE: SICHUAN HONGHUA, P/N: GB3452.1 140X5.3 |
| RING, GUIDE, SIZE: 10 X 2.5 X 462, FOR DRAWWORKS, MODEL: JC40DB, MAKE: SICHUAN HONGHUA, P/N: KD22-90 10X2.5X462 |
| SENSOR, FOR DEADLINE ANCHOR, MODEL: JZG34A, MAKE: HUBEI JIANGHAN, P/N: JZ400B.1.5 |
| STUD, EQUAL LENGTH, M20X300, GRADE C, FOR DEAD LINE ANCHOR, MODEL: JZG34A, MAKE: HUBEI JAINGHAN, P/N: GB/T 953-1988 |
| DIAPHRAGM, JZ400B.1.5 LOAD CELL, FOR DEAD LINE ANCHOR, MODEL; JZG34A, MAKE: HH, P/N: JZ250 |
| HOSE ASSY, RUBBER, RIG HPU, FOR RIG HPU, MODEL: YZ094-TC, 51I-2200FL40(1-90) |
| HOSE ASSY, RUBBER, RIG HPU, FOR RIG HPU, MODEL: YZ094-TC, 13I-2200J26C |
