XQ28/1.8Y Workover Power Tong
XQ28/1.8Y workover power tong is an open type power tong, which is used to make and unload sucker rod joint threads in oil field workover operations.
This power tong has the following features:
⑴ The main tong is driven by a low-speed and high-torque oil motor, and the manual reversing valve is directly matched with the oil motor. The structure is simple, compact and light.
(2) The new hydraulic back tong is matched with the main tong to form a combined tong. By manipulating the manual reversing valve on the main tong, the back tong is automatically synchronously clamped and the sucker rod joint is released synchronously.
⑶ The pliers of the main pliers and the back pliers are the inner surface roller climbing type two-way clamping mechanism, and the reversing clamping only needs to change the direction of the steering knobs on the main pliers and the back pliers.
⑷ Change the tooth blocks of different specifications to clamp the sucker rod joints or oil pipes of the corresponding specifications.
⑸ Two-speed shifting, low-speed punching, high-speed twisting, high work efficiency.
| XYQ1.8.Z-2 Centralizing roller |
| XYQ3C.Z-46 Bushing |
| 3C5- GBT91-2000 split pin 5X50 |
| XYQ1.8Z.1J5 Knob |
| XYQ1.8.Z-31 medium wheel |
| 3C2-22 XYQ3C.B-15 Front support for back clamp |
| XYQ1.8Z.10 axis |
| 3C1-76 XYQ3C.Z-42 Intermediate wheel bushing |
| XYQ1.8Z 1.7 Spring seat |
| 3C2-53 GB/T3452.1-1992 O-ring 38.7X3.55 |
| 3C4-1 XYQ3C.HD-1 Rear guide bar |
| 3C5-1 GB/T5782-2000 Hexagon bolt M16X60 |
| XYQ3C.Z-47 transition plate |
| XYQ1.8.B.1-2 end cap |
| 3C1-1 GB/T5782-2000 Hexagon head bolt M10X20 |
| 3C5-7 XYQ3C.DT-3 Spring |
| GB1235-76 0-shaped sealing ring 28X3.1 |
| 3C1-77 XYQ3C.Z-43 Intermediate shaft |
| 3C5-10 GBT6172.1-2000 Hexagonal Thin Nut M20 |
| 3C2-5 GB/T6170-2000 Hexagon Nut M12 |
| XYQ1.8.Z 3.2 Fork |
| 3C1-107 GBT78-2000 Hexagon Socket Set Screw M10X10 |
| XYQ1.8.Z.1-13 Knob axis |
| XYQ1.8HD.0 rear guide rod assembly |
| XYQ1.8.01 Knob axis |
| 3C2-15 XQ12.Z-05-I0 Spring |
| 3C3-6 GB/T91-2000 split pin 2.5X20 |
| 3C1-37 GB/T70.1-2000 Hexagon socket head cap screws M12X30 |
| 3C2-38 XQ6B.B-10-6 Cylinder head |
| XYQ1.8.B-13 Limit screw |
| XYQ1.8806 cylinder liner |
| 3C2-16 GB308-89 steel ball |
| 3C4-2 XYQ3C.HD-2.0 Rear guide rod sleeve |
| XYQ1.8Z.1-6 Jaw plate (or jaw) |
| XYQ1.8ZJ4 spline gear |
| GBT’117-2000 Taper pin 4×20 |
| XYQI.8.Z.1-3 rolled the axis |
| GB859-87 Light spring washer 8 |
| 3C4-4 XYQ3C.HD-4 rear guide |
| XYQ3C.Z.5-3 Spring seat (1) |
| 3C1-140 GB/T93-87 Spring washer 8 |
| 3C3-3 XYQ3C.QD-3 Spring |
| GB91-86 split pin 5×35 |
| 3C4-3 XYQ3C.HD-3 Spring |
| 3C1-49 XYQ3C.Z-28 Brake disc |
| XYQ1.8Z 1.4 rolled |
| XYQ1.8BJ5 upper support seat |
| XYQ1.8Z.16 Gasket |
| XYQ1.8.02 back clamp head cover |
| XYQ1.8.QD-4 front guide rod sleeve |